Chromatography Autosampler Vial Caps Only
Microsolv Technology Corporation Caps, Headspace, Crimp Top, with Blue Silicone Rubber / White PTFE, High Purity Septa, fitted in Aluminum, Silver Caps with 10mm center holes. For use with 20mm Crimp Top Headspace Vials. 100/PK.
High Purity Silicone Rubber / PTFE Septa with Durometer of 35 Shore A, (hardness) and 3.0mm thick with Ultra Low Bleed Rubber that is made with a proprietary process for ultra durability, purity and low extractables. Excellent choice for highly sensitive analyses. The very low Durometer means that this is a softer Septa and therefore better with easier penetrations by autosampler needles.Wide temperature range from -60⁰ to 200⁰C.
Microsolv Technology Corporation Caps, Headspace, Screw Top, with Blue Silicone Rubber / Transparent PTFE Septa, fitted in Steel, Magnetic, Silver Caps with 8mm center holes. For use with 18mm Precision Thread Headspace Vials. 1000/CS.
Silicone Rubber / Ultraclean PTFE Septa has a durometer of 45⁰ Shore A (hardness) and is 1.3mm thick. Cap has ND18 Screw Threads. Recommended with CTC, Agilent, Perkin Elmer TurboMax 16, 40 & 110 and other autosamplers.
Microsolv Technology Corporation Septa, 20mm, Headspace, Clear Silicone Rubber / White PTFE. For use in 20mm Crimp Caps, sold separately. 1000/CS.
Silicone Rubber / PTFE Septa 60mil, 50mil rubber and 10mil PTFE. This Septa is good for higher temperature analyses. Temperature range from -60⁰ to 200⁰C. Use in Aluminum or Steel Crimp Caps for Headspace autosamplers. Supplied in Polyethylene Bags.
Microsolv Technology Corporation Caps, Snap Top, with White PTFE Septa, fitted in smooth, polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
This PTFE (only) Septa is for single injections or non volatile samples as it will not reseal. Buying in case quantities can save money and time.
Microsolv Technology Corporation Caps, Snap Top, with White PTFE Septa, fitted in smooth, polyethylene, Green Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
This PTFE (only) Septa is for single injections or non-volatile samples as it will not reseal.
Microsolv Technology Corporation Caps, Snap Top, with White PTFE Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
This PTFE (only) Septa is for single injections or non-volatile samples as it will not reseal.
Microsolv Technology Corporation Caps, Snap Top, with White PTFE Septa, fitted in smooth, polyethylene, Yellow Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
This PTFE (only) Septa is for single injections or non-volatile samples as it will not reseal.
Microsolv Technology Corporation Caps, Snap Top, with White PTFE Septa, fitted in smooth, polyethylene, Yellow Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
This PTFE (only) Septa is for single injections or non-volatile samples as it will not reseal.
Microsolv Technology Corporation Caps, Screw Top, Solid, with a Red-Orange Silicone Rubber / TEF liner, in "knurled", closed Blue Caps. For use with 9-425mm thread,12x32mm autosampler vials. MicroSolv Brand 1000/CS.
Silicone Rubber with TEF liner is inert lowers the cost. Liner is 53° Shore D, 0-2mm. Solid top turns autosampler vials into storage vials.
Microsolv Technology Corporation Caps, Screw Top, with Natural Rubber / TFE Septa, fitted in "knurled", polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Natural Rubber does not contain siloxanes like Silicone Rubber. TFE is similar to PTFE when comparing inertness.
Microsolv Technology Corporation Caps, Screw Top, with PTFE Septa, fitted in "knurled", polypropylene, Translucent Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
Rubber-free Cap is useful when rubber cannot be used with your analysis. This PTFE (only) Septa is for single injections or non-volatile samples as it will not reseal
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Septa, fitted in smooth sided, Robo Style, soft polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Caps, Screw Top, with Silicone Rubber / PTFE Septa, fitted in smooth sided, Robo Style, soft polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, bonded in "knurled", polypropylene, Yellow Caps. For use with 9-425 thread, 12x32mm autosampler vials. 100/PK.
Low durometer makes the Septa easier to penetrate by the autosampler needles.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, fitted in "knurled", polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, fitted in "knurled", polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.